6-WAY RF DIVIDER/COMBINER, OUTDOOR, DC BLOCK, SMA
Model Number W6SDC02
| 1-24 | $201.43 |
| 25-49 | $191.36 |
| 50+ | $185.32 |
- Weatherproof (IP67)
- Six (6) Ports Block DC (50V)
- High Isolation (>25 dB AVG)
- Pass 10 MHz All Ports
- RoHS Compliant
| FREQUENCY (MHz) | Z (Ω) | INSERTION LOSS (dB) ABOVE SPLIT | AMP BAL (dB) | PHASE BAL | ISOLATION (dB) |
| 698 - 4200 | 50 | 2.0 Max | 0.6 Max | 6° Max | 20 Min |
BAND SPECIFIC PERFORMANCE, IN MANY INSTANCES, WILL BE MUCH BETTER THAN BROADBAND SPECIFICATIONS.
ADVANCED RF weatherproof power splitter/combiner model W6SDC02 is a superior 6-way microstrip Wilkinson power divider optimized for broadband performance from 698-4200 MHz with industry leading specifications. Model W6SDC02 covers 5G C-BAND, GNSS, LTE, GPS/L-Band, WiMAX, GSM, W-CDMA, PCS/DCS/UMTS and many more global communication bands in a single device. Constructed using all RoHS compliant materials and supplied with SMA jack (f) connectors. This outdoor 6-way power divider is also available with N, TNC, BNC or QMA connector options.
Splitter/combiner model W6SDC02 has an integrated DC block rated for 50V max on all output ports. The Wilkinson divider circuit is tuned to maintain a perfect match for RF Tx/Rx signals. Full specs here.
Silicone rubber o-rings and gaskets between all critical mating surfaces ensures power divider/combiner model W6SDC02 will provide long-term reliable operation in outdoor applications or other environments where ingress protection is required.
All ADVANCED RF weatherproof splitters/combiners can be easily installed in our 1U-5U rack panels - providing flexible configuration options and accomodate future expansion plans in a 19" std EIA rack panel. Alternatively, a non-rack installation of power divider model W6SDC02 is possible using the provided .16" [4.0 mm] dia thru holes.
Open ports will degrade performance and may cause permanent damage to model W6SDC02. A well-matched 50Ω coaxial termination/load should be installed on any open port during operation.
Include ADVANCED RF products from the earliest planning stages through production - 3D STEP files available in the download section.
Contact us for assistance choosing the right splitter/combiner for your application or if you need a modification to an existing model. For example, some customers have requested a different connector on either the input or output side of the splitter to eliminate the need for adapters.
Weight: 661 grams
Related Products
6-WAY DIVIDER/COMBINER, OUTDOOR, DC BLOCK, SMA
W6SDC01
$195.40
- DC Pass One Port
- SMA Jack (f)
- 698-4200 MHz
- IP67
6-WAY POWER SPLITTER/COMBINER, DC BLOCK, SMA
6SDC02
$176.82
- DC Block All Ports
- SMA Jack (f)
- 698-4200 MHz
ELECTRICAL PDF
| FREQUENCY (MHz) | 698 - 4200 |
| IMPEDANCE | 50 Ω |
| INSERTION LOSS (dB) | 2.0 MAX (ABOVE -7.78 dB SPLIT) |
| AMPLITUDE BALANCE (dB) | 0.6 MAX |
| PHASE BALANCE (DEG) | 6 MAX |
| ISOLATION (dB) | 20 MIN |
| VSWR (PORT S) | 1.45:1 MAX |
| VSWR (PORT 1-6) | 1.25:1 MAX |
| VDC (VOLTS) | 50 MAX |
| RF POWER RATING (WATTS) | |
| AS SPLITTER1 | AS COMBINER2 |
| 50 | 1.0 |
MECHANICAL PDF
| CONNECTORS | SMA JACK, BRASS, TRI-ALLOY PLATE |
| CONTACT PINS | BERYLLIUM COPPER, GOLD PLATE |
| HOUSING | ALUMINUM, CHEMICAL FILM |
| INSULATOR | PTFE, VIRGIN ELECTRICAL GRADE |
| O-RING/GASKET | SILICONE RUBBER |
| TEMPERATURE | -55°C TO +85°C |
| WEIGHT | 661 GRAMS |
Complete electrical and mechanical specifications for power divider/combiner model W6SDC02 including an outline drawing.
3D model file for power splitter/combiner W6SDC02. Compatible with CAD software able to open the STP/STEP file format.
Please login to download this file.
DataSheet - W6SDC02, 6-WAY RF DIVIDER/COMBINER, OUTDOOR, DC BLOCK, SMA