2-WAY SPLITTER, DC BLOCK, WEATHERPROOF, SMA
Model Number W2SDC03
| 1-24 | $116.74 |
| 25-49 | $110.90 |
| 50+ | $107.40 |
- Weatherproof (IP67)
- One (1) Port Block DC (50V)
- Low Insertion Loss (0.6 dB Avg)
- High Isolation (>22 dB Avg)
- RoHS Compliant
| FREQUENCY (MHz) | Z (Ω) | INSERTION LOSS (dB) ABOVE SPLIT | AMP BAL (dB) | PHASE BAL | ISOLATION (dB) |
| 350 - 6000 | 50 | 1.3 Max | 0.3 Max | 6° Max | 18 Min |
BAND SPECIFIC PERFORMANCE, IN MANY INSTANCES, WILL BE MUCH BETTER THAN BROADBAND SPECIFICATIONS
ADVANCED RF weatherproof power splitter/combiner model W2SDC03 is a superior 2-way microstrip Wilkinson power divider optimized for wideband performance from 350-6000 MHz with industry leading specifications. Model W2SDC03 covers 5G (low band), Public Safety, UHF, WiMAX, GSM/ISM, SATCOM, PCS/DCS/UMTS and many more global communication bands in a single device. Constructed using all RoHS compliant materials and supplied with SMA jack (f) connectors. This outdoor 2-way power divider is also available with N or QMA connector options.
Splitter/combiner model W2SDC03 has an integrated DC block rated for 50V max on one of the output ports. This unique feature of the splitter may be necessary when powering an antenna through one port and sharing the signal with multiple receivers. The Wilkinson divider circuit is tuned to maintain a perfect match for RF Tx/Rx signals. Full specs here.
Silicone rubber o-rings and gaskets between all critical mating surfaces ensures power divider/combiner model W2SDC03 will provide long-term reliable operation in outdoor applications or other environments where ingress protection is required.
All ADVANCED RF splitters/combiners can be easily installed in our 1U-5U rack panels - providing flexible configuration options and accomodate future expansion plans in a 19" std EIA rack panel. A non-rack installation of power divider model W2SDC03 can be accomodated using the provided .16" [4.0 mm] dia thru holes.
Open ports will degrade performance and may cause permanent damage to model W2SDC03. A well-matched 50Ω coaxial termination/load should be installed on any open port during operation.
Include ADVANCED RF products from the earliest planning stages through production - 3D STEP files available in the download section.
Contact us for assistance choosing the right splitter/combiner for your application or if you need a modification to an existing model. For example, some customers have requested a different connector on either the input or output side of the splitter to eliminate the need for adapters.
Weight: 313 grams
Related Products
2-WAY DIVIDER, DC BLOCK, WEATHERPROOF, SMA
W2SDC04
$127.69
- DC Block All Ports
- SMA Jack (f)
- 350-6000 MHz
- IP67
ELECTRICAL PDF
| FREQUENCY (MHz) | 350 - 6000 |
| IMPEDANCE | 50 Ω |
| INSERTION LOSS (dB) | 1.3 MAX (ABOVE -3.01 dB SPLIT) |
| AMPLITUDE BALANCE (dB) | 0.3 MAX |
| PHASE BALANCE (DEG) | 6 MAX |
| ISOLATION (dB) | 18 MIN |
| VSWR (PORT S) | 1.30:1 MAX |
| VSWR (PORT 1,2) | 1.30:1 MAX |
| VDC (VOLTS) | 50 MAX |
| RF POWER RATING (WATTS) | |
| AS SPLITTER1 | AS COMBINER2 |
| 50 | 1.0 |
MECHANICAL PDF
| CONNECTORS | SMA JACK, BRASS, TRI-ALLOY PLATE |
| CONTACT PINS | BERYLLIUM COPPER, GOLD PLATE |
| HOUSING | ALUMINUM, CHEMICAL FILM |
| INSULATOR | PTFE, VIRGIN ELECTRICAL GRADE |
| O-RING/GASKET | SILICONE RUBBER |
| TEMPERATURE | -55°C TO +85°C |
| WEIGHT | 313 GRAMS |
Complete electrical and mechanical specifications for power divider/combiner model W2SDC03 including an outline drawing.
3D model file for power splitter/combiner W2SDC03. Compatible with CAD software able to open the STP/STEP file format.
Please login to download this file.
DataSheet - W2SDC03, 2-WAY SPLITTER, DC BLOCK, WEATHERPROOF, SMA