6-WAY GNSS/GPS SPLITTER/COMBINER, SMA
Model Number 6SGPS1
| 1-24 | $208.84 |
| 25-49 | $198.40 |
| 50+ | $192.13 |
- 1000-2000 MHz
- GNSS (GPS, GALILEO, GLONASS, etc)
- Five (5) Ports Block DC w/200Ω Internal Load
- High Isolation (>25 dB AVG)
- RoHS Compliant
| FREQUENCY (MHz) | Z (Ω) | INSERTION LOSS (dB) ABOVE SPLIT | AMP BAL (dB) | PHASE BAL | ISOLATION (dB) |
| 1000 - 2000 | 50 | 1.0 Max | 0.4 Max | 6° Max | 20 Min |
BAND SPECIFIC PERFORMANCE, IN MANY INSTANCES, WILL BE MUCH BETTER THAN BROADBAND SPECIFICATIONS
ADVANCED RF power splitter/combiner model 6SGPS1 is a superior 6-way microstrip Wilkinson power divider circuit covering all Global Navigation Satellite System (GNSS) frequency bands (GPS, GLONASS, IRNSS, GALILEO, BeiDou, QZSS). Constructed using all RoHS compliant materials and supplied with SMA jack (f) connectors. This 6-way splitter is also available with N, TNC, BNC or QMA connector options.
Model 6SGPS1 integrates a DC block and 200Ω internal load on five output ports. This unique feature of the splitter may be necessary when powering an antenna through one port and sharing the signal with multiple receivers. Using a splitter which only has DC blocking may cause the receiver to detect a antenna fault. The 200Ω internal load solves this issue and draws the necessary current preventing receiver error. The Wilkinson divider circuit is tuned to maintain a perfect match for RF Tx/Rx signals. Full specs here.
For outdoor use or in harsh environments where ingress protection is required, weatherproof (IP67) model W6SGPS1 adds silicone o-rings and gaskets ensuring reliable operation.
All ADVANCED RF splitters/combiners can be easily installed in our 1U-5U rack panels - providing flexible configuration options and accomodate future expansion plans in a 19" std EIA rack panel. Alternatively, a non-rack installation of power divider model 6SGPS1 is possible using the provided .16" [4.0 mm] dia thru holes.
Open ports will degrade performance and may cause permanent damage to model 6SGPS1. A well-matched 50Ω coaxial termination/load should be installed on any open port during operation.
Include ADVANCED RF products from the earliest planning stages through production - 3D STEP files available in the download section.
Contact us for assistance choosing the right splitter/combiner for your application or if you need a modification to an existing model. For example, some customers have requested a different connector on either the input or output side of the splitter to eliminate the need for adapters.
Weight: 658 grams
Related Products
6-WAY GPS SPLITTER, DC PASS/BLOCK, OUTDOOR, SMA
W6SGPS1
$228.46
- DC Pass One Port
- SMA Jack (f)
- 1000-2000 MHz
- IP67
6-WAY GNSS/GPS SPLITTER/COMBINER, SMA
6SGPS2
$226.74
- DC Block/Load All Ports
- SMA Jack (f)
- 1000-2000 MHz
ELECTRICAL PDF
| FREQUENCY (MHz) | 1000 - 2000 |
| IMPEDANCE | 50 Ω |
| INSERTION LOSS (dB) | 1.0 MAX (ABOVE -7.78 dB SPLIT) |
| AMPLITUDE BALANCE (dB) | 0.4 MAX |
| PHASE BALANCE (DEG) | 6 MAX |
| ISOLATION (dB) | 20 MIN |
| VSWR (PORT S) | 1.45:1 MAX |
| VSWR (PORT 1-6) | 1.25:1 MAX |
| RF POWER (WATTS) | 501,2 (SPLITTER) |
| DC PASS | DC BLOCK | |
| VDC (VOLTS) MAX | 50 | 15 |
| DC CURRENT (mA) MAX | 500 | 75 |
MECHANICAL PDF
| CONNECTORS | SMA JACK, BRASS, TRI-ALLOY PLATE |
| CONTACT PINS | BERYLLIUM COPPER, GOLD PLATE |
| HOUSING | ALUMINUM, CHEMICAL FILM |
| INSULATOR | PTFE, VIRGIN ELECTRICAL GRADE |
| TEMPERATURE | -55°C TO +85°C |
| WEIGHT | 658 GRAMS |
Complete electrical and mechanical specifications for power divider/combiner model 6SGPS1 including an outline drawing.
3D model file for power splitter/combiner 6SGPS1. Compatible with CAD software able to open the STP/STEP file format.
Please login to download this file.
DataSheet - 6SGPS1, 6-WAY GNSS/GPS SPLITTER/COMBINER, SMA