12-WAY GPS SPLITTER, DC PASS/BLK, OUTDOOR, N
Model Number W12NGPS1
| 1-24 | $414.63 |
| 25-49 | $393.90 |
| 50+ | $381.46 |
- Weatherproof (IP67)
- GNSS (GPS, GALILEO, GLONASS, etc)
- Eleven (11) Ports Block DC w/200Ω Internal Load
- High Isolation (>25 dB AVG)
- RoHS Compliant
| FREQUENCY (MHz) | Z (Ω) | INSERTION LOSS (dB) ABOVE SPLIT | AMP BAL (dB) | PHASE BAL | ISOLATION (dB) |
| 1000 - 2000 | 50 | 1.4 Max | 0.4 Max | 8° Max | 20 Min |
BAND SPECIFIC PERFORMANCE, IN MANY INSTANCES, WILL BE MUCH BETTER THAN BROADBAND SPECIFICATIONS
ADVANCED RF weatherproof power splitter/combiner model W12NGPS1 is a superior 12-way microstrip Wilkinson power divider circuit covering all Global Navigation Satellite System (GNSS) frequency bands (GPS, GLONASS, IRNSS, GALILEO, BeiDou, QZSS). Constructed using all RoHS compliant materials and supplied with N jack (f) connectors. This outdoor 12-way splitter is also available with SMA, TNC, BNC or QMA connector options.
Model W12NGPS1 integrates a DC block and 200Ω internal load on eleven output ports. This unique feature of the splitter may be necessary when powering an antenna through one port and sharing the signal with multiple receivers. Using a splitter which only has DC blocking may cause the receiver to detect a antenna fault. The 200Ω internal load solves this issue and draws the necessary current preventing receiver error. The Wilkinson divider circuit is tuned to maintain a perfect match for RF Tx/Rx signals. Full specs here.
Silicone rubber o-rings and gaskets between all critical mating surfaces ensures power divider/combiner model W12NGPS1 will provide long-term reliable operation in outdoor applications or other environments where ingress protection is required.
All ADVANCED RF weatherproof splitters/combiners can be easily installed in our 1U-5U rack panels - providing flexible configuration options and accomodate future expansion plans in a 19" std EIA rack panel. Alternatively, a non-rack installation of power divider model W12NGPS1 is possible using the provided .16" [4.0 mm] dia thru holes or the 6-32 threaded blind holes on the front.
Open ports will degrade performance and may cause permanent damage to model W12NGPS1. A well-matched 50Ω coaxial termination/load should be installed on any open port during operation.
Include ADVANCED RF products from the earliest planning stages through production - 3D STEP files available in the download section.
Contact us for assistance choosing the right splitter/combiner for your application or if you need a modification to an existing model. For example, some customers have requested a different connector on either the input or output side of the splitter to eliminate the need for adapters.
Weight: 1553 grams
Related Products
12-WAY GPS SPLITTER, DC BLK/LOAD, OUTDOOR, N
W12NGPS2
$430.25
- DC Block/Load All Ports
- N Jack (f)
- 1000-2000 MHz
- IP67
12-WAY DIVIDER/COMBINER, OUTDOOR, DC BLOCK, N
W12NDC1
$355.08
- DC Pass One Port
- N Jack (f)
- 698-4200 MHz
- IP67
ELECTRICAL PDF
| FREQUENCY (MHz) | 1000 - 2000 |
| IMPEDANCE | 50 Ω |
| INSERTION LOSS (dB) | 1.4 MAX (ABOVE -10.79 dB SPLIT) |
| AMPLITUDE BALANCE (dB) | 0.4 MAX |
| PHASE BALANCE (DEG) | 8 MAX |
| ISOLATION (dB) | 20 MIN |
| VSWR (PORT S) | 1.50:1 MAX |
| VSWR (PORT 1-12) | 1.20:1 MAX |
| RF POWER (WATTS) | 501,2 (SPLITTER) |
| DC PASS | DC BLOCK | |
| VDC (VOLTS) MAX | 50 | 15 |
| DC CURRENT (mA) MAX | 500 | 75 |
MECHANICAL PDF
| CONNECTORS | N JACK, BRASS, TRI-ALLOY PLATE |
| CONTACT PINS | PHOSPHOR BRONZE, GOLD PLATE |
| HOUSING | ALUMINUM, CHEMICAL FILM |
| INSULATOR | PTFE, VIRGIN ELECTRICAL GRADE |
| O-RING/GASKET | SILICONE RUBBER |
| TEMPERATURE | -55°C TO +85°C |
| WEIGHT | 1553 GRAMS |
Complete electrical and mechanical specifications for power divider/combiner model W12NGPS1 including an outline drawing.
3D model file for power splitter/combiner W12NGPS1. Compatible with CAD software able to open the STP/STEP file format.
Please login to download this file.
DataSheet - W12NGPS1, 12-WAY GPS SPLITTER, DC PASS/BLK, OUTDOOR, N